- Autor(in)
- Sponsor(in)
- Referenz
-
10 M. Moske, K. Samwer, Rev. Sci. Instrumen. 59 (1988) 2012; Two errors have to be corrected: formula (2) of this paper should be Δ Z = ( l1 + l2) l2/ R, and the relevant elastic modulus of the quartz substrate is E = 1/( S13 + S33)
12 M. Moske, Thesis, Göttingen 1988
13 J. P. Hirth, S. J. Hruska, G. M. Pound, Single crystal films. M. H. Francombe, H. Sato (eds.), Pergamon Press 1964, p. 9;
14 H. Warlimont, Z. Metallkde. 75 (1984) 679;
15 K. H. J. Buschow, N. M. Beekmans, Phys. Stat. Sol. A60 (1980) 193
16 D'ans, E. Lax, Taschenbuch für Physiker und Chemiker, Bd. I. Springer-Verlag, Berlin - Heidelberg - New York 1967;
17 A. Regenbrecht, G. v. Minnigerode, K. Samwer, Z. Phys. B - Condensed Matter - 79 (1990) 25;
18 Y. Kato, S. Takayama, E. Matsubara, Y. Waseda, Jpn. J. Appl. Phys. 30 (1991) 764
1 R. Abermann, R. Koch, Thin Solid Films 129 (1985) 71;
2 R. W. Hoffmann, Thin Solid Films 34 (1976) 185
3 R. Abermann, H. P. Martinz, Thin Solid Films 115 (1984) 185;
4 G. Thurner, R. Abermann, Thin Solid Films 192 (1990) 277
5 H. J. Bauer, W. Buckel, Helv. Phys. Acta 41 (1968) 674;
6 M. Moske, K. Samwer, Z. Phys. B - Condensed Matter - 77 (1989) 3
7 C. J. Lin, Mat. Res. Soc. Symp. Proc. Vol. 150 (1989) 15;
8 H. Heitmann, M. Hartmann, M. Rosenkranz, H. J. Tolle, Journal de Physique Colloque C 6 (1985) 9;
9 A. G. Dirks, H. J. Leamy, J. Appl. Phys. 49 (1978) 1735;
A. v. d. Beukel, J. Sietsma, Acta Metal Matter 38 (1990) 383
American Institute of Physics Handbook. D. E. Gray (ed.), McGraw Hill, New York 1972
D. S. Gardener, P. A. Flinn, J. Appl. Phys. 67 (1990) 1831;
D. Weller, W. Reim, Mat. Res. Soc. Symp. Proc. Vol. 150 (1989) 33
D. Winau, R. Koch, K. H. Rieder, J. Appl. Phys. 70 (1991) 3081
D. Wolf, Appl. Phys. Lett. 58 (1991) 2081
H. Awano Y. Suzuki, T. Katayama, A. Itoh, J. Appl. Phys. 68 (1990) 4569;
H. J. Bauer, W. Buckel, Z. Phys. 216 (1968) 507;
H. J. Bauer, W. Buckel, Z. Phys. 220 (1969) 293
H. Takagi, S. Tsunashima, S. Uchiyama, J. Appl. Phys. 50 (1979) 1642;
H. Takagi, S. Tsunashima, S. Uchiyama, T. Fuji, Jpn. J. Appl. Phys. 18 (1979) 399;
J. P. Hirth, K. L. Moazed, Physics of Thin Films, Vol. 4. G. Hass, R. E. Thun (eds.), Academic Press, New York - London 1964, p. 97
J. Souletie, J. Phys. France 51 (1990) 881;
M. H. Kryder, J. Magn. Magn. Mat. 83 (1990) 1
P. Hansen, C. Clausen, M. Rosenkranz, G. Much, K. Witter, J. Appl. Phys. 66 (1989) 756
P. Hansen, J. Appl. Phys. 63 (1988) 2364;
S. Eickert, to be published
S. Yoshino, H. Takagi, S. Tsunashima, M. Masuda, S. Uchiyama, Jpn. J. Appl. Phys. 23 (1984) 188;
- Seitenbereich
-
0164 - 0171
- Schlagwort(e)
-
<KWD>Amorphous films
Film growth
Mechanical properties
- Zusammenfsg.
-
Macroscopic tensile and compressive mechanical stresses in the film plane are observed during the growth of amorphous binary-alloy films of ZrCo and TbCo prepared by the condensation of the metal vapours from two electron-beam evaporators. The mechanical stress is measured by a capacitive cantilever beam technique. Both kinds of stresses are affected by composition and substrate temperature, but the compressive stress additionally depends on the film thickness, evaporation rate and substrate material. The results are discussed in terms of a model for the growth of amorphous films published earlier.
- Artikel-Typen
- Forschungsartikel